Hey! Thanks for that drawing. Looks like the GTO Endura front end requires them to stabilize the top of the bumper (if Iam reading it right)
Not so much for the LeMans Sport as the Bumper is bolted to the top of the core with a couple brackets that look like straps
I have found some subtle differences in the lenght of the uprights of the repop core for the GTO as compared to the LeMans which would alter the hiegth by as much as a quarter inch.
This worries me when thinking about the effect it would have on the bottom gap of fender to door, so I have removed the bottom rail and working on not only the angle (8- 10 degrees,) but the hieght of the core as well. Much like Data Way had done on his replacement core.
Thanks again to all who've contributed to filling my brain on the differences.
|