Thread: 1973 Ventura
View Single Post
  #1  
Old 05-13-2021, 06:17 AM
Cliff R's Avatar
Cliff R Cliff R is offline
Ultimate Warrior
 
Join Date: Nov 2000
Location: Mount Vernon, Ohio 43050
Posts: 18,000
Default 1973 Ventura

Finally decided to sell the Ventura as it hasn't been on the street or at the track now in nearly 2 years.

Stroked 428 four bolt main block to 455 CID, KRE aluminum heads from Dave at SD, makes more power than you could ever use, but very mild at a glance. No expense spared in the engine, transmission and diff/suspension. Can be driven anywhere and will run nearly into the 10's in full street trim thru the mufflers by simply lowering the tires pressure to 18psi, don't even have to shut it off or cool it down.

Dead solid reliable and turn key mechanically other than needing a new set of DOT's.

Frame is rock solid, nothing more than a little surface rust in a few places. Hasn't seen water other than from washing it in over 30 years. Body could use a little work, interior is rough. Still looks good and runs even better.

Getting out of the car thing and moving on to other adventures.

$15,000 firm, no trades, serious inquiries only.

Can send pics or can be seen in Mount Vernon Ohio 43050.

https://www.youtube.com/watch?v=8U9iDTv3zj4

https://www.youtube.com/watch?v=6zVdoLR-VzM&t=21s

PM or call me at the shop:

740-397-2921

__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
https://cliffshighperformance.com/
73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile),