If anyone knows about these passlock systems any input is appreciated. What I've done so far.
Cut yellow and black wires at ignition. Taped black and yellow wires seperately that were left. Put a 2200 ohm resistor between black and yellow wires that go to the body control module (BCM). In theory this is to fool the unit into believing all is ok and to start. However, I am still in lockout mode which shuts down fuel to the injectors. I have checked every fuse in the vehicle and every fuse is good. The security light is off on the dash panel by the way.
So I'm looking for help here. Thank you.
__________________
Genesis 6:13
|