Quote:
Originally Posted by misterp266
Opinions wanted especially from people actually running a roots blower on the street.
Street driving only!
Carbureted 433” w/671 blower. Shooting for 10psi maximum boost. 330cfm SD ported Edelbrock heads. Cam is a Spotts specked 248/258 @ .050 .541I .541E.
Don’t want to over build for street use only. Was thinking of a 140 lbs/hr Aeromotive SS pump pn11213 with a return style regulator pn13212. 3/8” lines both ways. I already have the regulator.
|
Let get the specs correct 140 GPH, as I would not run a 140 lbs/hr on an N/A 433 ci engine. What fuel do you plan on running?
Stan
__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm