Quote:
Originally Posted by Formulajones
Is that used in conjunction with each other?
I ask because I have a theory from the testing I've done with the RPM intakes that has me thinking the taper spacer (as so many call them, I call them super suckers) speaking of the short 1" taper spacer, doesn't always work on a dual plane intake, but it might work well if it were open underneath, hence a 1" open spacer used under it.
Which has me wanting to try a 2" super sucker or even a 1 1/2" super sucker which is basically a completely open spacer underneath the taper portion. It accomplishes the same thing with one spacer that I believe you are doing above with two of them..
|
No not together. We currently run the 1" tapered with a 1/2" open but there wasn't any performance difference.