[Scarebird]

We got the brackets in from the cutters. *They are a more refined design; simpler. *They use the 10379038 GM 2004-2011 Cadillac CTS *pedal assy. *These run around $70 from Rockauto and Nalley GMC. *We needed to weld an extension to fit the existing F pedal. We did try the Impala piece - the offset was wrong. This is the Caddy piece here:



We start with the bracket here:



The smaller piece off to the left is a backer we made as one of the firewall holes was stripped so we elected to use bolts. *Mounting 3 individual bolts is no fun, so we ganged them together, and left a shelf to mount wire looms to boot on the engine side.



We used 3 nylon spacers to clear the insulation for rigidity.



Mounted.



All finished. *I drove the car today to the paint shop - pedal motion is identical to a vechicle of 70's vintage. We will sell the bracket, weldable pedal rod and 3 nylon spacers for $38 plus shipping, just mention PY...