So, as you can see, we will be making our own front motor plate out of 1/4" aluminum. There will be a lot of aluminum fab going on in this build. My son Nick is doing all of the Tig welding on this project, he also just acquired a new mill and will be doing a lot of the machining and lathe work. So stay tuned as we make our own stud girdles, EFI top for the Gutsram base, injector bosses for the secondary set of fuel rails (We will have a gasoline set of rails and a methanol set of rails stacked on the Gutsram base) Fuel rails from blank fuel rail stock, Lower crank pulley and drive mandrel from a 6" round billet among other odds and ends. Lots of work ahead of us! Next up we are going to install the mini tubs while we can still get back there before putting too much cage in the way. More to come.......
__________________
1964 GTO
501, Edelbrock Heads NA, 3460 lbs.
9.76 @ 137mph
1971 Trans Am Lucy Blue, 11.56 @ 115
1966 LeMans. 462, SD prepped Kaufman D ports. 11.90 @ 112
1976 Trans Am twin turbo 462, SD Edelbrock heads 8.50@159
2009 G8 GT
|