Thread: 73 redo
View Single Post
  #31  
Old 11-13-2022, 11:39 PM
cnc's Avatar
cnc cnc is offline
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default

Hey Jeff…..thanks how u doin?????
Here’s a couple from within the paint shop a while ago and now at home, rear bumper is on now u can just see it in one of the other pics as well as the PONTIAC lettering used white models paint and thinners to drop the paint into the void of the lettering….not in the pic though …
I’ve got the door handles on, new locks installed, new door seals though one is different from the other figure that one out so I ordered 2 more seals ….new cowl seal to go on, trunk seal installed dry fit for now …if u look at the cowl pic the hood is on top of the roof for now until I’m ready to put it back on once I do the engine harness……lots of time to get this done for spring at this rate….since we got snow here now……dam pic upside down
Attached Thumbnails
Click image for larger version

Name:	1896D1F0-307C-443E-A2DF-6665BE4FEB58.jpeg
Views:	147
Size:	77.4 KB
ID:	602139   Click image for larger version

Name:	1028EF6D-E980-4BD3-BEA5-C2452EA6F21C.jpeg
Views:	138
Size:	76.3 KB
ID:	602140   Click image for larger version

Name:	ABDB441E-5C16-4BA7-B85E-9374C8BE3EBD.jpg
Views:	125
Size:	51.3 KB
ID:	602141   Click image for larger version

Name:	C7C3FE6C-AAB9-4C45-B625-E92E43E7F63D.jpg
Views:	128
Size:	95.7 KB
ID:	602142  

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's

Last edited by cnc; 11-13-2022 at 11:53 PM.