Quote:
Originally Posted by Lee
I bought mine the same way (eBay), probably from the same place, and for the same reasons!
David, I tested all 3 with the nicely domed lid that cam with the rounded base. All 3 were tested with a 3" K&N that is virtually brand new.
I did not test the rounded base (1.5" drop) with both height elements, but I did test the medium-drop (1") with both the 3 and 4 with the rounded top, and they performed virtually identically.
Lee
|
So the 3" filter was effectively a 1.5/2" filter with the 1.5" drop base?
I'm not trying to argumentative, but wonder if those recommending a flat base are comparing apples to apples.
__________________
frittering and wasting the hours in an off hand way....
1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core.
|