Quote:
Originally Posted by 76TA462
At the start I had a long way to get past RF gremlins (mostly but not only ground issues - old). After that the Sniper worked with the base tune, but I did plenty of additional tuning after that and it made things even better. About a year later I added timing control. I already had a MSD billet so I only had to change to a MSD phase kit.
|
i have been running sniper for about a year on the 350 thats in car now
i have tuned on it some im not expert but know the basics and plan on going to holley distubter next upgrade but im wanting to get my 400 built 1st and want have the funds to do both this year .i want to get some decent power in car for now and the low compression 350 anit going to cut it.im a good way in 400 right
now just picked up block from machine shop tuesday so i hop eto get crank and pistons in this week then im back to wanting on cam and lifters which i have not ordered yet since im still on fence i want the sound of the ram 4 cam
but i think motor would run better with voodoo 702 or 703 or crower 243
to hard to choose