Quote:
Originally Posted by Tinindianworkshop
What Master cylinder can I use to replace original single cylinder and conv. To dual master for all drum brakes thanks Geoff
|
I use a 68 to 74 AMC Gremlin master cylinder for manual drum brakes all around.. They also used a disc/drum master on those cars in case you want to do a disc brake conversion later on. You will have to put reducers on the line inlet for the master cylinder since the Gremlin uses larger lines. I got the reducers at Napa. The lines are on the passenger side too. You will have to extend the rod from the brake pedal to the master cylinder. I bought a 3 foot length of threaded rod and cut it down then rounded one end down to fit into the MC. (I am sure there are other ways) I believe the total length needed is 7 1/4 inches long.
There was an article in the Little Indians newsletter in the late 90's or early 2000's that I followed.