63 Tri Power
I`m looking for the factory correct routing of vacuum lines.
I removed the mechanical linkage and installing the factory vacuum set up.
I looked in the 63 service manual & master parts book but can`t see the correct routing of the vacuum lines.
My car has standard brakes, no power booster.
I installed the correct control unit in the front of the intake, the correct control assembly on the front carb & the correct vacuum switch on the middle carb.
My front & middle carb`s have vacuum ports in the rear of the base.
I am also looking for the proper vacuum source for the distributor vac advance & the vacuum line from the heater control on the dash.
Thanks KC
__________________
|