For dist vacuum you will probably also need to feed vac to the heater also. That is part 25 and 60. Pictures attached from a couple of carbs (62 for P8 has hot idle comp. and a 64 for T8) as one picture is missing part 64 to the distributor. Other picture has it in place. I think it is available from pontiactripower. Looks like the small pipe to feed the heater has been abused from years on a shelf. The "T" off the carb base (63) can probably be made from parts store pieces. A little brass pipe and a "T". Although the fitting for the heater vacuum (60) may make that also unobtainable. I'll add a couple of pictures of that also.
Maybe Dick Boneske can help you with parts.
|