remove the 3 bolts that holds the back of fender
2 on underside at rocker and one in the middle.
You can then reach inside the door and loosen the hinges with door closed.
Its best to remove the detent spring first so theres no pressure on it.
You may have to trick the door into thinking its lower than it really is by jacking the striker pin up a bit.
These doors will sag and crack at the hinge area because they are SMC and are so long.
If you want to upgrade the detent rollers I have maintenance free ball bearing ones.
__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
|