Quote:
Originally Posted by Petegto
Larry thanks for your reply. I have another question if you don’t mind, I can buy a posi & 3:08 nos gears from a 71 big car Pontiac. Guy tells me that only needs to be done is to change the yoke and maybe cut the drive shaft and that should work. After reading what you wrote I have some doubts about it since you mentioned about the pinion spline is 28 in the 71’s and 30 spline in my 67. Can you give me your opinion on this? The gears are Nos and the posi is rebuilt.
I put in a 421 factory motor from a 66 2+2 with 3x2’s and stroked the motor bored .060.
Thank you
|
He is correct , just use the 71-76 yoke on pinion with 71 gears and posi , as far changing u-joint and or driveshaft length pretty sure its just a conversion u joint at worst may not even need to do that
__________________
63 Catalina coupe 455 budget drag car 11's 1/4 , 7.4 1/8th
66 Star Chief Executive 57k mile
69 Le Mans 2 dr HT 350 85k mile 15 sec 1/4
69 Firebird 400 Burgandy/Black
70 Olds Rallye 350 F85 4 speed 3.91's
70 Olds Cutlass Cruiser Red Wagon 350 101k miles 15 sec 1/4 12 sec w 455
74 Cheyenne Super C10 LWB Gen 6 454 w ZZ502 cam 3.07gear 13.1 1/4, 8.3 1/8
2020 RAM 1500 SLT 4x4 5.7 A8 Hemi
2007 Hummer H3 3.7 liter turd
2019 Chevy Spark petrol car 38 mpg
|