View Single Post
  #4  
Old 06-17-2021, 02:49 PM
steve25's Avatar
steve25 steve25 is offline
Ultimate Warrior
 
Join Date: May 2008
Location: Westchester NY
Posts: 14,753
Default

You should think about getting a switch to Tee in like a SW 76073.
This comes set to 35 psi and has both normally open and normally closed contacts on it.
You can wire it to light to warn you when pressure goes lower then 35 psi, in fact it’s adjustable, so you could set it for 45 or 25 if you like .
This switch can also help you trouble shoot what’s going on now if you have a volt/ohm meter you do not even have to wire it up to see if your current oil sender is screwing up or not.

__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!

1) 1940s 100% silver 4 cup tea server set.

Two dry rotted 14 x 10 Micky Thompson slicks.

1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.

Education is what your left with once you forget things!