Quote:
Originally Posted by JLMounce
You need the standard 600hp models for either the Sniper or Fitech. Timing control at least in the FiTech line doesn't exist on the GoStreet 400hp model.
The Pro Flow 4 should support about 500 hp with it's supplied injectors. I think you'd be fine there, but you'll likely be running them around 80-90% duty cycle so you'd effectively be capped there for future expansion without an injector change.
I'm making these assumptions at around 450-470hp for your build.
|
If you want to over-build for more power or future proof, the Sniper Xflow says it can support upwards of 800 HP.