Quote:
|
Originally Posted by lawbreaker2
What is the best way to remove the clear coat of them.
|
imo a chemical stripper, sand paper can ruin the finish if your not careful, there is no way the chemical can ruin the finish on the aluminum.
__________________
www.fquick.com/Captainofiron
68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
|