Is it just the pictures or do you have the braided drain line laying against the Turbo feed pipe?
Another comment, the drain pipe/hose needs to be 20% larger than the bottom hole in the CHRA drain.
Most times people use a section of stainless pipe for the drain at least 6 inches long to get away from the
heat of the turbine housing. Then if you want to add some Braided line that is flexible that is ok from that point on.
On a engine that is driven for any period of time the heat from the turbine housing will kill a normal braided shield
drain line.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
Last edited by Tom Vaught; 04-28-2020 at 07:52 PM.
|