View Single Post
  #4  
Old 07-15-2022, 12:14 PM
jwhit jwhit is offline
Member
 
Join Date: Jul 2022
Posts: 43
Default

Quote:
Originally Posted by John Milner View Post
I have had good luck with a cam like a Summit 2802 (224 234 .465 .488 114) in 400's up around 9.5-10:1 compression and 3:55 gears. It will idle with a slight loap but still have plenty of low end torque. A lunati 703 would work well also. I ran that camshaft in a 10:1 428 and it ran strong with a slight loap. Both of those camshafts will like the 2500 stall/3:55 combination. An 041 will sound great and run decent but will have less low end power than both the 2802 summit and 703 lunati cams. It really could use 10:1 compression minimum and a lower gear than what you currently have.
i considered the 2802 cam from summitt i just wasnt sure it would have that lopey cam sound like the 2821(041) am i hurting mysel badly going with 041 to get the sound over the other cams ? also i didnt note this but im running sniper efi on single plane intake