Thanks Shurkey. After I posted and thought of my idea of taping the switch, I figured it was just a one time click I'd be missing and that wouldn't work. When I tested the wiring to accelerator switch while disconnected, I found it had power. Not sure how I get on the switch with it connected to see if power is going through. Other than listening for solenoid click or if I can find power on tranny side wiring to switch. Since I don't know which of two tranny wires is for solenoid, I'll check both.
Here is what the manual says on resetting the switch. It sounds opposite of what you say, unless I'm interpreting it wrong.
|