For now get a small adjustable turn buckle from a hardware store to extend your cables nose if you can.
My local store goes down to some dam small sizes!
Be sure to use a jam nut on the machine screw you use to bolt the turn buckle to your cable and leave things on the loose side of tight.
Use nylon washers if they have them too on each side of your cable’s nose.
You may not get full throttle like this, but you can drive & tune the motor.
Nice paint job on your motor by the way!
__________________
I do stuff for reasons.
Last edited by 25stevem; 05-20-2022 at 04:35 PM.
|