Just back from the shop now, got the cam out and the lifters, new johnson rollerlifter fits snug and smooth in all bores.
Heads are off, and timingcover is off, mocked up the new cam and timing set, trying my hand at degreeing in the cam.
a Nice suprise was that the pistons are 0.001 down the hole, virtually Zero decked.
The old cam i pulled out was a EDL-7157.
__________________
Murphy's law - "Anything that can go wrong will go wrong".
-469 ,Butler 310+ Eheads, Hurricane intake portmatched by butler, Butler roller 230/236 @0.50 112 LSA, Johnson lifters, pypes 2 1/2" exhaust, 3.42 yukon duragrip lsd, holley sniper efi, hyperfuel efi tank +++
Last edited by djustice; 03-26-2022 at 03:29 PM.
Reason: More info
|