fwiw, I have setup in my signature. Don't use 5th till 75 mph(about 2000rpm) which is still slow in Michigan but i'm considering ditching my 3.42 for 3.73 or 4 something. Just need to watch my 1st to make sure I don't make it useless. Also considering cam change to pull power band down a bit.
__________________
462 Yc Block, zero deck
Probe forged pistons 6cc relief, Scatt Hbeam rods floating pins aprox. 10.21 CR
Comp Hyd-roller cam,roller lifters,springs ect.
236 244@ .050 108 LSA .511 lift, duration 289,297 @.oo6
Edelbrock Aluminum 87cc round port heads Larger valves ,ported polished and cut
Powerjection3,T2 manifold, Try-y’s
Flowcooler water pump.
71 formula with TKO600,hydraulic clutch 3.42 posi and 26 inch tire.
17x9 YO Honeycombs with Nitto 555's
|