Quote:
Originally Posted by tekheavy
This is Rustoleum Gloss Charcoal Gray.
|
i used the rustoleum brand spray can wheel paint for my rally 2 also, while it might not be 100% correct original it is very close and is a excellent quality paint for a spray can.
i used their silver & charcoal after a standard primer using the trick to pour some into the seam as spraying doesnt get it down in the seam very well & will lead to rust later on, did that with the argent too before spraying the whole wheel.
as a final step i used some matte clear wheel paint for a little extra protection & since these werent a full 100% gloss originally from what i've seen, they were more of a semi or satin sheen and a very thin coating, too thick where it fills in the stamped codes or rounds the edges of the spokes & too glossy doesnt look right.
i did the spoke masking by hand with great results but suggested the stencils for my friend & they worked good too.