| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-22-2015, 04:15 PM
|
||||
|
||||
Does anyone know if a factory size HEI cap will
Does anyone know if a factory size HEI cap will clear the plenum of a Wenzler 1 tunnel ram....first design Wenzler t-ram ...not the Gutsram
Thanks |
|
#2
09-23-2015, 06:43 AM
|
||||
|
||||
|
Not sure if the rear bottom of the Plenum will clear the top of a HEI ?
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
|
#3
09-23-2015, 09:00 AM
|
||||
|
||||
|
It will not.
If it did it would be on my car already. At least for a test fit. When I tried it - no go....cap hit the rear plenum corner and would not slide all the way back. Mine has already been cut and welded on in the runners, so I MIGHT try and clearance the back of the WENZLER. Or spend time/money on a small cap distributor..... that may or may not be as stable as the HEI
__________________
65 GTO, 3800#, 474, KRE Dport 330 cfm, 11:1 on pump gas, XE 242 248 solid roller, T56 trans, 3.90 gear, 11.26 @ 124 mph |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
