[428RA4]

Hello All -

I'm trying to figure out and identify which is the correct steering arms needed for disc brakes on an F body first gen with close ratio steering box. This is the single piston set up that is also used on many B and X body cars.

To the best of my knowledge there are two different kinds of these arms that mount to the back of the spindle. One as a tapered hook like end towards the front of the car and the other does not.

Any insight would be greatly appreciated.

[mbwicz1]

I would call Mark at SC&C.com, he can let you know what you need. First gen cars have lots of bump steer, so he may be able to point you toward a replacement arm that helps your car handling.

Mike