FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1970 TA restoration
Just got this into the shop a 1 owner 70 TA with 73,000 original miles. Had 1 repaint about 15 years ago. I need to fix the drivers side floor pan and toe board. Then a full repaint. I'm not seeing any panel replacement but won't know until I get into it. Should be a fun project. I will be asking questions as I go through the disassembly process. Also will need to know a good parts supplier.
|
#2
|
||||
|
||||
looks like a really nice car to start.
|
#3
|
||||
|
||||
Very nice starting point!
73 Grilles and front bumper? |
#4
|
|||
|
|||
That does look like a 73 nose/grills. I've got a couple perfect 70-72 noses if you wanted to trade.
|
#5
|
|||
|
|||
Hmm I'm not a TA guy just doing this car for a local neighbor. He didn't say the nose was from a 73 but I can ask. My dad said when he was younger he wasn't easy on this car. So maybe it was replaced. Any pictures I can compare the 70 to the 73?
|
#6
|
||||
|
||||
__________________
Mike/Illinois |
#7
|
|||
|
|||
I see what you guys are saying now. So can you put 73 inserts in a 70 nose? The noses look the same to me?
|
#8
|
||||
|
||||
Quote:
73's had to meet a 5mph crash standard...... To do it right...you need to change both bumper and grills
__________________
Eye Candy......garage band? https://www.youtube.com/watch?v=QUPcHxHRx3s Go full screen & turn it UP! |
#9
|
||||
|
||||
That's a 73 nose. They were longer in the "beak" area, featured large egg crate grills, and had a lot of steel behind them that ties into the radiator support.
I wonder if it still have the 70 support and fenders? Do you have a pic of the engine bay? Does the hood latch come through the driver side grill, or come out down in the lower valance?
__________________
"Those poor souls have made the fatal mistake of surrounding us. Now we can fire in any direction" 1970 Trans Am RAIII 4 speed 1971 Trans Am 5.3 LM7 1977 Trans Am W72 Y82 1987 Grand National |
#10
|
|||
|
|||
I will get some more pictures tonight of the grill area thanks for all the input.
Jason |
#11
|
||||
|
||||
As project bird says,post picture of top of rad support.... and where fenders meet inners....
If it's been popped in the front before,the front end may be "incorrect" 73......
__________________
Eye Candy......garage band? https://www.youtube.com/watch?v=QUPcHxHRx3s Go full screen & turn it UP! |
#12
|
|||
|
|||
Ok removed most of the interior last night and as expected will need just a drivers side floor pan and toe board. Now from what I see AMD just started reproducing the toe board but its all one piece and you cut what you need. Is there any other option? I just need the front floor pan and from my research camaro/firebird are the same from 1970-81?
These are the pictures you requested of the front grill area. As you can see a piece of wire is being used to open the hood. He said he has the latch that is suposed to go down under the grill. Do the reproduce this lower valance or spoiler that is all cracked in the picture? |
#13
|
|||
|
|||
Ok removed most of the interior last night and as expected will need just a drivers side floor pan and toe board. Now from what I see AMD just started reproducing the toe board but its all one piece and you cut what you need. Is there any other option? I just need the front floor pan and from my research camaro/firebird are the same from 1970-81?
|
#14
|
|||
|
|||
Not sure why...but yesterday I was able to post pictures today I can't? Need a moderators aproval?
|
#15
|
|||
|
|||
Ok removed most of the interior last night and as expected will need just a drivers side floor pan and toe board. Now from what I see AMD just started reproducing the toe board but its all one piece and you cut what you need. Is there any other option? I just need the front floor pan and from my research camaro/firebird are the same from 1970-81?
|
#16
|
|||
|
|||
Ok removed most of the interior last night and as expected will need just a drivers side floor pan and toe board. Now from what I see AMD just started reproducing the toe board but its all one piece and you cut what you need. Is there any other option? I just need the front floor pan and from my research camaro/firebird are the same from 1970-81?
|
#17
|
|||
|
|||
These are the pictures you requested of the front grill area.
As you can see a piece of wire is being used to open the hood. He said he has the latch that is suposed to go down under the grill. Do the reproduce this lower valance or spoiler that is all cracked in the picture? |
#18
|
|||
|
|||
Do they reproduce the lower valance panel
|
#19
|
|||
|
|||
Yes they do... and that is indeed a 73 front clip.
|
#20
|
|||
|
|||
Now are you saying the front rubber grill is 73 or the complete front clip? Fenders and front grill area is 73?
|
Reply |
|
|