FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
|||
|
|||
![]()
need an original front fender flare mounting bolt for 74 ta ....this bolt attaches the flare to the lower spoiler under the facia...thx keith 318-393-1502
|
#2
|
|||
|
|||
![]()
is this a special bolt for that location? or just a standard 1/2" hex head about 3/4-1" long? i think that lower bolt has a captive washer? do you have a pic of another one?
|
#3
|
|||
|
|||
![]()
need the head marking for this specific spot and washer size...thx keith....according to the assembly manual it is a bolt and 2 washers and a standard nut
|
#4
|
|||
|
|||
![]()
can you post a pic of the manual info? ive never seen a stand alone separate nut for this application or body panels etc. even on the early 70-73 cars they used a speed clip but it had a standard nut integrated into it, instead of the later style speed clips that have the threads molded into the clip.
i cant say for sure on a 74 but i have parted out one & its unlikely it was a stand alone nut, some of the locations you couldnt get to the nut to hold it, which is why they used speed clips. hope you figure it out. |
#5
|
|||
|
|||
![]()
i will post tonight,yes 74-75 are different from earlier cars and stand alone. thx
|
Reply |
Thread Tools | |
Display Modes | |
|
|