| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
07-25-2005, 07:13 AM
|
||||
|
||||
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> 670 heads in a 455 with no dish??? You must have about 12:1 compression.....wow! What kind of fuel do you use? Are the 670s good enough for a 455? </div></BLOCKQUOTE>
Yes, it's around 12:1. I use a 50/50 mix of 93 octane unleaded and 110 octane Cam2 generally. I realise that it would ultimately harm the engine because there is inaudible detonation. But I was totally surprised that it hardly pinged at all with mostly a straight 93 octane in it. I'd say it was 80% 93 and 20% 110 when I was coming home from the cruise. For the heck of it I added even more 93 when I got home and it still barely pinged. I did end up hearing though and went back to a 50/50 mix. Jim Butler helped me pick my cam for my combo. The other thing that changed with my newest combo is the heads were street/strip ported for the new cam. Probably lost a few CC's there too. They were basically untouched with the Ultradyne setup. I just cleaned them a little by removing casting high spots.
__________________
_________________________ _________________________________ http://www.youtube.com/watch?v=_qZgOpn-w-o <<< Burnout Video  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Treat Me Good, I'll Treat You Better; Treat Me Bad, I'll Treat You Worse" Sonny Barger ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
