FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Parting Out 1972 LeMans
I'm parting out a 1972 LeMans. This is my parts car for my 1970 GTO build. It's about 50% gone. No front end. no doors, no bumpers, no seats. Still has some trim, steering column, shifter, wiring, and lot's of misc little parts which can be hard to find. Also entire cab with good floors, trunk, roof and bad quarters. I'm going to try and sell the cab locally, but if I can't I can cut patch panels for anyone who is interested. Car needs to be gone by winter. If you need anything let me know and I'll try and make you a good deal. Just hate to see these parts go to waste.
__________________
1977 Trans Am 400/4spd 1972 LeMans 400 Sport 1970 GTO 400/3spd 1965 GTO 4brl/4spd Hi, my name is Jason . . . and I'm a Pontiholic! |
#2
|
|||
|
|||
Hi,
looking for window channel, lower rear pass side and upper front pass corner with some sheet metal that goes into roof. I can take pictures and outline what im looking for... Let me know please. Thanks Sam! |
#3
|
||||
|
||||
If you cut it up I need the welded on "hooks" under the rear package shelf that the rear seat back hangs from.....not sure it there are 2 or 3.
|
#4
|
|||
|
|||
I need the chrome Window Garnish Mouldings that hold the window Rubber seal on top of window and 1/4 Glass ??? Scott
|
#5
|
|||
|
|||
BAN: I assume you are talking about sheet metal? If you are, I have it. I want to try and sell the whole body first. I'll keep you posted.
abefromen: If I cut the car up I should have what you need. I'll keep you posted. BlvjdJudge: I have both of these. Let me look them over and see how good of shape they are in. I'm pretty sure these are stainless? I'll get back to you with condition and price. Thanks, Jason
__________________
1977 Trans Am 400/4spd 1972 LeMans 400 Sport 1970 GTO 400/3spd 1965 GTO 4brl/4spd Hi, my name is Jason . . . and I'm a Pontiholic! |
#6
|
|||
|
|||
Are you keeping the dash pad or is it cracked or is it available ? I could use one for my 72 GTO..... I have an A/C car if it matter's......
|
#7
|
|||
|
|||
Yes they are Stainless / Polished chrome there are 4 Pieces, They are the mouldings that hold the upper window rubber seals for doors and 1/4 Window . Please advise on the condition , Thanks Scott
|
#8
|
|||
|
|||
Does the car have any decent side moldings? Is there a console (I need the light housing under the indicator for an automatic)? How about rear window stainless trim (need the upper left piece)?
Thanks, Mike |
#9
|
||||
|
||||
I need the bracket that the drivers fender attaches to at the bottom. Is spot welded to the firewall. Thanks
__________________
1972 Pontiac LeMans-My First car (1998 to Forever) Build Thread http://forums.performanceyears.com/f...d.php?t=627472 1972 Pontiac LeMans Endura Car-Barn Find Build Thread http://forums.performanceyears.com/f...d.php?t=714496 1972 Pontiac Luxury LeMans Build Thread http://forums.performanceyears.com/f...d.php?t=721018 1979 Pontiac Firebird-400/3 speed...The Nice Weather Driver |
#10
|
|||
|
|||
BlvdJudge
The moldings are in pretty good shape. No dings or bends or kinks. Some rust on the back side, mostly at the back of window. There is one scratch that is about 4" long. Also one trailing edge is pushed in a little, but it should bend back out fine. They need some buffing and there is some paint overspray on them. The corner pieces are not in very good shape. One is split and the other is pretty bent. Also includes the factory screws. I've included pictures. I'll take $60 plus shipping if you want them. I have a few more pictures and at better resolution. Send me your email if you want more.
__________________
1977 Trans Am 400/4spd 1972 LeMans 400 Sport 1970 GTO 400/3spd 1965 GTO 4brl/4spd Hi, my name is Jason . . . and I'm a Pontiholic! |
#11
|
|||
|
|||
For all of those looking for sheet metal, I'll keep you posted. It will be a few weeks before I decide to cut it up. But I am leaning that way right now.
mbwicz1 - No side moldings. I have the console piece you want, but I'm not sure I want to separate it. I'll look through the rest of my parts, I may have a spare. I have a complete set of rear window molding, but I don't want to split them up. I'll sell the whole set for $60 plus shipping. 74 SD455 Formula - Sorry no dash pad.
__________________
1977 Trans Am 400/4spd 1972 LeMans 400 Sport 1970 GTO 400/3spd 1965 GTO 4brl/4spd Hi, my name is Jason . . . and I'm a Pontiholic! |
#12
|
|||
|
|||
How about the drivers side lower cowl are. The part that's hidden by the fender. I need almost all of it.
__________________
1971 T-37 2004 GTO Sold 1974 Nova Sold 1967 Mustang |
#13
|
|||
|
|||
Jason,
Is the console in decent shape? Let me know what you need for the console plus the light bezel, please. Thanks, Mike |
#14
|
||||
|
||||
Gas pedal assembly?
__________________
3 Generations of "Beach Boys Racing" ! Everybody knows somthin. Nobody knows everything ! 1st time on a dragstrip, 1964. Flagstart ! "Thanks for the entertainment." "Real Indians Don't Wear Bowties" |
#15
|
|||
|
|||
I have the entire gas pedal assembly. Pedal, screws, steel plate, plastic holder, steel rod, spring, kick down switch and bracket. How about $30 plus shipping? Let me know if you are interested and your email address and I can send you pictures of everything.
__________________
1977 Trans Am 400/4spd 1972 LeMans 400 Sport 1970 GTO 400/3spd 1965 GTO 4brl/4spd Hi, my name is Jason . . . and I'm a Pontiholic! |
#16
|
||||
|
||||
Any word on the lower fender bracket that mounts on the firewall for the drivers side? Also need a trunk "Pontiac" emblem if you have it?
__________________
1972 Pontiac LeMans-My First car (1998 to Forever) Build Thread http://forums.performanceyears.com/f...d.php?t=627472 1972 Pontiac LeMans Endura Car-Barn Find Build Thread http://forums.performanceyears.com/f...d.php?t=714496 1972 Pontiac Luxury LeMans Build Thread http://forums.performanceyears.com/f...d.php?t=721018 1979 Pontiac Firebird-400/3 speed...The Nice Weather Driver |
#17
|
|||
|
|||
gtomike - yes, I have the firewall bracket you need. Just not ready to cut the car up yet. I need to look through my emblems to see if I have one. If I do, it would only be driver quality.
__________________
1977 Trans Am 400/4spd 1972 LeMans 400 Sport 1970 GTO 400/3spd 1965 GTO 4brl/4spd Hi, my name is Jason . . . and I'm a Pontiholic! |
#18
|
||||
|
||||
If you decide to cut the body I need the metal dash part that the lower windshield sits in, houses the defroster openings,, Bottom of windshield to where the top of dash screws into. Thanks
|
#19
|
|||
|
|||
Did the car have a vinyl top? I am looking for a set of driprail moldings.
So all together, I am looking at the rear window trim, console light, console base, and drip rail moldings. Lemme know.... Thanks, Mike |
#20
|
|||
|
|||
I'm looking for the little plastic rear window reveal moldings that go in the bottom corners by the package tray. (On the inside of the car.)
Thanks Chris |
Reply |
|
|