FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
||||
|
||||
Does anyone know if a factory size HEI cap will
Does anyone know if a factory size HEI cap will clear the plenum of a Wenzler 1 tunnel ram....first design Wenzler t-ram ...not the Gutsram
Thanks |
#2
|
||||
|
||||
Not sure if the rear bottom of the Plenum will clear the top of a HEI ?
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#3
|
||||
|
||||
It will not.
If it did it would be on my car already. At least for a test fit. When I tried it - no go....cap hit the rear plenum corner and would not slide all the way back. Mine has already been cut and welded on in the runners, so I MIGHT try and clearance the back of the WENZLER. Or spend time/money on a small cap distributor..... that may or may not be as stable as the HEI
__________________
65 GTO, 3800#, 474, KRE Dport 330 cfm, 11:1 on pump gas, XE 242 248 solid roller, T56 trans, 3.90 gear, 11.26 @ 124 mph |
Reply |
|
|