| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
I've had this Nov 1960 Service News stuck in one of my shop manuals for some time. Getting a little brittle and dog eared on the edges so I decided to scan and share before it became unreadable. Due to file size limits I had to scan at a fairly low dpi but I think it should be readable. Also due to file size limits I can probably only attach a few page with each post so it will take several posts.
Contains both big car and Tempest information. I only have this one but there are likely many others. Perhaps this belongs in a "sticky" but I don't know how to consolidate them all and do that kind of a post. (Hint Hint) Contains some interesting information. Hope you find it helpful. |
|
#2
|
||||
|
||||
|
They are pretty useful. I have a full set for the 1961 model year (I forget the exact months, but from about September 1960 through July 1961.) I posted some pages from the February 1961 issue some years ago, showing where to drill in the floor for mounting seat belts: http://forums.maxperformanceinc.com/...81&postcount=8
|
|
#3
|
||||
|
||||
|
I have some I've collected. Find them full of info!!!
Neat looking back too...
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
| Reply |
|
|