| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-13-2004, 02:32 PM
|
|||
|
|||
I just had a muncie trans rebuilt and reinstalled it in my '69 GTO. Now I only have a reverse gear and no forward gears or neutral. Please tell me it's something simple with the linkage. I have the 2 forward arms with the tabs(?) facing up and the reverse one facing down. The trans shop is reputable so I think it's something I messed up. Any help would be appreciated. Thanks
|
|
#2
04-13-2004, 02:32 PM
|
|||
|
|||
|
I just had a muncie trans rebuilt and reinstalled it in my '69 GTO. Now I only have a reverse gear and no forward gears or neutral. Please tell me it's something simple with the linkage. I have the 2 forward arms with the tabs(?) facing up and the reverse one facing down. The trans shop is reputable so I think it's something I messed up. Any help would be appreciated. Thanks
|
|
#3
04-13-2004, 04:12 PM
|
||||
|
||||
|
You have the transmisstion levers on correctly. Loosen the shifter rods at the trunnions. On the side of the shifter there will be a 1/4 inch hole use a 1/4 inch drill bit to line up all three levers on the shifter, this will be neutral on the shifter. Move the transmission levers to get the transmission in neutral. abjust the rods to line up with the shifter levers.Thats it.
Its also a good idea to have new bushings for the rod ends
__________________
Its ok to giggle and snicker, Dont laugh and point |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
