The Body Shop TECH General questions that don't fit in any other forum

          
Reply
 
Thread Tools Display Modes
  #1  
Old 07-18-2006, 09:16 PM
lkt1954's Avatar
lkt1954 lkt1954 is offline
Chief Ponti-yacker
 
Join Date: Jul 2004
Location: Dumas,TX
Posts: 548
Default Correct Trunk Splatter

I have done a search of splattering the trunk on a 66 GTO and would like to make sure I am correct before we splatter the trunk tomorrow.

1) I am going to use the GM splatter paint and spray clear over the top to seal it.
2) Coverage area in the trunk is the entire floor up to the seat divider, wheel wells, panels between the wheel wells and the tail panel, the area up to the tail lights, leaving the latch and tension rod braces black. Is this correct??

This is the final step to complete this project and I would like to be correct. Any help will be appreciated.

Thanks
Larry

__________________
Get in-Sit Down- Shut Up - Hold On
  #2  
Old 07-18-2006, 10:09 PM
mwritter's Avatar
mwritter mwritter is offline
Ultimate Warrior
 
Join Date: Feb 2004
Location: Southern NJ
Posts: 1,973
Default

I'm sure others can chime in with more ceartainty, but I had overspray on my tention rods and trunk latch, both body color and trunk spatter. I'm not sure at what point along the assembly line the trunks were done.

Although not in your post, I hope you won't mind some advice. When I did my trunk I went through 4 cans of aerosol spatter and could probably have used two more to get it really nice. In hindsight, I should have used a gray primer first, and I probably could have gotten away with 2-3 cans. I used less than 1/2 can of clear, even for two coats.

__________________
Matt

1962 Grand Prix - Cameo Ivory|389 4sp|One-Owner Survivor
1964 GTO HT - Silvermist Grey|389 3x2s 4spd|A/C|Hurst Wheels|Frame-off|SOLD
1965 GTO Post - Mayfair Maize|421 3x2s TKO600|Pro-Touring|
1966 GTO HT - Barrier Blue|389 3x2s 4spd|Red Fenderliners
2005 GTO Coupe - Yellow Jacket|Magnacharged LS2 6sp|543hp/561tq|SOLD
2006 GTO Coupe - Spice Red|LS2 6sp|20k orig miles
  #3  
Old 07-18-2006, 10:52 PM
lkt1954's Avatar
lkt1954 lkt1954 is offline
Chief Ponti-yacker
 
Join Date: Jul 2004
Location: Dumas,TX
Posts: 548
Default

Thanks mwritter. I figure there will be some over spray to look "factory". We are not going to spray the underside of the shelf due to speakers and the same for the under side between the lid and rear panel. I got 6 cans of the GM splatter to be safe. The trunk has been sprayed once with a light coat of flat black. Thanks for your imput and FYI sorry for the multiple post.... damn internet.

Larry

__________________
Get in-Sit Down- Shut Up - Hold On
  #4  
Old 07-18-2006, 11:31 PM
mike nixon mike nixon is offline
Moderator
 
Join Date: Dec 1999
Location: PORTLAND,IN,47371
Posts: 12,322
Default

another thing relating "correct" in this area is the plant the car was built at. if it's a calif car the paint sold these day's isn't even close to what remains of the oem paint in my 65.

it did / does have oversray in the areas you mentioned. the underside of the pkg tray was body color but not a heavy coating of it. the upright seat bracing in the trunk had /s overspray along the bottom but is 60% +/- gloss black.

the primer will help the coverage when used as a base.

mike

__________________
so many pontiacs, so little time..................


moderator is a glorified word for an unappreciated prick..................


"Only two things are infinite, the universe and human stupidity, and I'm not sure about the
former." --Albert Einstein



"There is no such thing as a good tax."

"We contend that for a nation to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle."

- Winston Churchill
  #5  
Old 07-18-2006, 11:31 PM
mike nixon mike nixon is offline
Moderator
 
Join Date: Dec 1999
Location: PORTLAND,IN,47371
Posts: 12,322
Default

another thing relating "correct" in this area is the plant the car was built at. if it's a calif car the paint sold these day's isn't even close to what remains of the oem paint in my 65.

it did / does have oversray in the areas you mentioned. the underside of the pkg tray was body color but not a heavy coating of it. the upright seat bracing in the trunk had /s overspray along the bottom but is 60% +/- gloss black.

the primer will help the coverage when used as a base.

mike

__________________
so many pontiacs, so little time..................


moderator is a glorified word for an unappreciated prick..................


"Only two things are infinite, the universe and human stupidity, and I'm not sure about the
former." --Albert Einstein



"There is no such thing as a good tax."

"We contend that for a nation to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle."

- Winston Churchill
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:46 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017