[fyrffytr1]

Originally Posted by Greg Reid

Yeah, and then you remembereed it twice...Well, two out of three ain't bad Phil...lol

What can I say?

[fyrffytr1]

Well, I was able to put all of three hours into the car last week. I fixed the ground wire on the fuel sending unit and put it in the gas tank. I also installed the firewall insulation pad and did some repair work on the heater box.
If Santa is good to me I may have some more to do to the car.

My labor 264 hrs.....=$5,280.00
Parts....................=$7,579.93
Outside labor.........=$3,300.00

Total...................=$16,159.93

[Blue '66]

But Phil have YOU been a good boy this year?Your not expecting any coal?

I have not been doing much with mine lately,I will call the stripper/powdercoater to see if they have got to my stuff yet

Merry Christmas!

[fyrffytr1]

I'm always good! That's cause I'm too to be bad!

[ponderopa66]

I'm at a similar point in my resto on my 66. This is a great thread, and I've spun off it down many side trips.

Was wondering what you were using between the tank and the trunk floor. I decided to go with regular roofing "tar paper". I'm using strips under the straps also. You can see a few pics of my project in my profile.

Keep postin!

[fyrffytr1]

Originally Posted by ponderopa66

I'm at a similar point in my resto on my 66. This is a great thread, and I've spun off it down many side trips.

Was wondering what you were using between the tank and the trunk floor. I decided to go with regular roofing "tar paper". I'm using strips under the straps also. You can see a few pics of my project in my profile.

Keep postin!

When I bought the car, it came with a new gas tank, straps and rubber pad. So I will use it between the tank and body. I haven't given any thought about using something between the straps and tank.

[fyrffytr1]

With it being Christmas I didn't get anything much done. I re-repaired the heater box after installing one of the door shafts upside down. Removing it broke the box so I fiberglassed it and will try again tomorrow.
I got the dash and forward lamp harness for Christmas (Ain't my wife the best?). It should arrive about the 2nd of January.
I will update time and cost tomorrow night.

[fyrffytr1]

Three hours labor today on the heater box and I bought a new rag joint for $35.30.


My labor 267 Hrs.......$5,340.00
Parts......................$7,615.23
Outside Labor...........$3,300.00

Total.....................$16,255.23

[Old Blue 66]

Youve managed to save a ton of money so far. Most body shops would just be finishing the bodywork an paint for $16K.

[fyrffytr1]

I hope I haven't misled anyone here. While the bodywork has been done,except for the hood, the car has not been painted. It has only been jammed out. My body man said it would take about $5,000.00 more to finish.

[fyrffytr1]

I didn't get much done this week. Installed the engine wiring harness and two belts. I took the front fenders and core support back off to make it easier. I took the A/C evaporator box apart and washed about 5 pounds of leaves and trash out of it. Is there a way to bench test the evaporator?
Anyway, I spent four more hours and $22.37 on parts so her are the latest.

My Labor at 271 hours.......$5,510.00
Parts..............................$7,637.60
Outside Labor..................$3,300.00

Total............................$16,357.60

[fyrffytr1]

I pressure tested the evaporator this week. And that is all I got done. I had to work until Thursday afternoon and then was out of town until Saturday night.
Only had 1 hour labor so I will add it to next weeks totals. My job appears to be running out in the next few weeks so, unless something comes up I will have a lot of time(read that no money) to work on the car.

[Blue '66]

Sorry to hear about your job Phil.What are you going to do after your current job finishes up?

[fyrffytr1]

I am going to relax and let my wife keep me living the lifestyle I have become accustomed to!

I will find something. The good Lord has provided for me all my life and I trust he will in the future.

[Blue '66]

Originally Posted by fyrffytr1

I am going to relax and let my wife keep me living the lifestyle I have become accustome to

I LIKE that plan!!Let me know how it works out

My wife will finish her last semester here this spring and graduate in Aug so we will be moving when she finds a job.I just might try your plan Phil if it work good for you!

[fyrffytr1]

Well, work was really hectic this week. We had two jobs that had to be done by lunchtime Friday. Then, I helped a friend work at his church Friday afternoon and all day Saturday. They are building a new church and I helped with some of the trim work.
Anyway, you all know that means there was no time to work on the car. I keep saying that I will have some downtime in the near future but, somehow there is work to do. I am thankful for the work and as long as there is some the car will have to wait.
Now, I have to make a correction to my totals. I figured my hours wrong and have to take $90.00 off that total.(Y'all are supposed to catch these errors). And, I need to add a new category. That is gifts. I received $716.52 worth for Christmas. You can feel free to add to this total at anytime.
I spent $45.97 on various cleaning supplies and Rotella-T oil. So, here are the new totals
Labor at 271 hrs.............$5,420.00
Parts............................$7,683.57
Outside Labor................$3,300.00
Gifts...............................$716.52

Total..........................$17,120.09

[fyrffytr1]

Well, in between rain showers I was able to get a little done yesterday and today. I wire wheeled the metal vaccuum line that runs from the carb to the trans, the metal parts on the throttle cable, gas pedal and the brake booster.
I installed the gas pedal and linkage. I also painted and temporarily installed the brake booster and brake pedal assembly.
I even got all 8 spark plugs gapped and put in. I should be able to get this thing cranked in a couple of weeks. Oh yeah, I almost forgot, I put the thermostat and housing in too. Am I on a roll or what?
Here are some pics of the booster and my heater box.
I spent 5 hours doing this and bought $39.61 worth of parts and cleaners.
Anyway, here are the new totals:

Labor at 276 hrs.............$5,520.00
Parts............................$7,723.18
Outside Labor................$3,300.00
Gifts...............................$716.52

Total..........................$17,259.70

[fyrffytr1]

I spent several hours trying to get the parking brake system installed. Finally figured out I had the wrong crossmember hook. I got the core support reinstalled along with the radiator and started to put the gas tank in. That is not an easy job for an old man.
I had to re-re-do the back brake shoes as I had the wrong ones. I was sold 245s when I needed 242s The little difference in size made a big difference with fit and function. I got a $7.38 refund for the price difference in the brake shoes. I also buffed out the pedal pad trim. It turned out really nice.
I took some pics but have not downloaded them yet. I will post them when I do. I put 11 1/2 hours labor in so here are the new totals.
Labor at 287 1/2 hrs...........$5,750.00
Parts...............................$7,715.80
Outside Labor....................$3,300.00
Gifts...................................$716.52
Total.............................$17,482.32

[fyrffytr1]

Her are a few pics of what little progress I have made. I stillhave some work to do on the core support such as cleaning it and installing the seals. I am also going to replace the valve covers and air cleaner. What do you use to clean the rubber pedal pads?

[fyrffytr1]

Some more