[mechanickeith]

Originally Posted by roflo619

This is exactly what I was needing/wanting/hoping to hear! Thank you! Now to find a machine/brake shop that can do this for me the right way! ;-)

Look for an industrial brake shop. One that does brake & clutch rebuilding for heavy truck/construction equipment. They can handle it correctly. Here in the Phoenix area the only place I would trust for that type of work is Arizona Brake & Clutch.

[jdh421]

Not sure of you have found hubs yet. the 65-70 front cast iron drum can be removed from the hub by simply pounding out the wheel studs. I have replaced many grooved or cracked used drums onto original hubs. you will need a new set of front wheel studs when you replace the drums. I have a couple sets of hubs if you are still looking for a set. email me at [email protected]