THE LOBBY A gathering place. Introductions, sports, showin' off your ride, birthday-anniversary-milestone, achievements, family oriented humor.

          
Reply
 
Thread Tools Display Modes
  #1  
Old 04-04-2026, 09:21 PM
TommyGunn's Avatar
TommyGunn TommyGunn is offline
Junior Member
 
Join Date: Mar 2026
Location: Sandy Oregon
Posts: 7
Default Trim/fender question

So I've been doing little things like replacing belts, hoses, thermostat, etc. No idea how old existing ones are- so now I know LOL! I was washing her today and noticed all the chrome trim on the body has a blue plastic strip on top of it to match the paint- except the small piece in front of driver door. That one is black.(first pic). I went to check other side and passenger side doesn't even have one in front of door!(second pic). Doesn't look like there ever was one. Replacement fender- doesn't look like a replacement. Idiosyncrasie of this model? Any ideas why this is?
Sorry for sideways pics I can't figure out how to rotate them
Attached Thumbnails
Click image for larger version

Name:	20260404_180103.jpg
Views:	62
Size:	42.3 KB
ID:	667730   Click image for larger version

Name:	20260404_180130.jpg
Views:	64
Size:	44.9 KB
ID:	667731  

  #2  
Old 04-05-2026, 04:27 PM
tempest1964's Avatar
tempest1964 tempest1964 is offline
Ultimate Warrior
 
Join Date: Feb 2014
Location: Indianapolis,Indiana
Posts: 1,650
Default

If you go to the pictures you want to upload in your photos and crop them ever so slightly, they will not rotate on you when you upload them to the forum.

  #3  
Old 04-05-2026, 07:06 PM
TommyGunn's Avatar
TommyGunn TommyGunn is offline
Junior Member
 
Join Date: Mar 2026
Location: Sandy Oregon
Posts: 7
Default

Thanks I'll try that next time.

  #4  
Old 04-05-2026, 10:39 PM
poncho-mike poncho-mike is offline
Ultimate Warrior
 
Join Date: Feb 2002
Location: Raleigh, NC
Posts: 2,186
Default

You could buy these after-market at just about any place that sold automotive paint supplies. You have an extrusion that you cut to size and secure with pop rivets, end pieces designed for the application (the ones on the door were made to clear the fender when it opened) and the plastic piece that presses into the extrusion. It was sold by the foot and cut to length. These were a lot more sturdy than the flimsy factory door guards.

Here is a picture of my 1973 from the early 1990s. You can see the same type of trim with a black vinyl insert. That car had no door edge guard, I added it.
Attached Thumbnails
Click image for larger version

Name:	73-Form-1.jpg
Views:	29
Size:	73.3 KB
ID:	667780  

  #5  
Old 04-06-2026, 07:39 AM
TommyGunn's Avatar
TommyGunn TommyGunn is offline
Junior Member
 
Join Date: Mar 2026
Location: Sandy Oregon
Posts: 7
Default

Thanks. So you're saying chrome trim/door guard was not factory? Any idea why would it not have a piece on passenger side fender?

  #6  
Old 04-06-2026, 08:28 AM
johnta1's Avatar
johnta1 johnta1 is offline
Ultimate Warrior
 
Join Date: Feb 2001
Location: now sunny Florida!
Posts: 22,516
Default

On your buildsheet are options B84, B85, B86 and B96 are the side moldings and door edge guards.

Whether they are the original I don't know.
The missing piece could be because the fender was replaced/worked on or it just fell off?

One other thing that might help is to ask these questions in the big car section (67-79 Big Pontiac) that has more people with this knowledge, plus you will also get post counts, while in the Lobby you get no post counts. This section is for general type of questions or BS'ing and doesn't count toward post count.


__________________
John Wallace - johnta1
Pontiac Power RULES !!!
www.wallaceracing.com

Winner of Top Class at Pontiac Nationals, 2004 Cordova
Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats

KRE's MR-1 - 1st 5 second Pontiac block ever!

W.E.C moment


"Every man has a right to his own opinion, but no man has a right to be wrong in his facts."

"People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates
  #7  
Old 04-06-2026, 08:44 AM
Skidmark's Avatar
Skidmark Skidmark is offline
Senior Chief
 
Join Date: Apr 2021
Location: Wake Forest area, NC
Posts: 267
Default

The trim looks factory. The fender w/o the trim is most likely a replacement fender that did not come with the trim. My guess is previous owner never got around to installing the trim on replacement fender.
Not sure how they attach on my TA, but on the 72 lemans the trim has studs that attach with a nuts. Hard to get to in some areas i.e. doors.
Attached Thumbnails
Click image for larger version

Name:	20260314_171535.jpg
Views:	10
Size:	46.7 KB
ID:	667792  

__________________
72 Lemans sport 462 auto
75 Trans Am 4 speed 39k miles
  #8  
Old 04-06-2026, 08:52 AM
Skidmark's Avatar
Skidmark Skidmark is offline
Senior Chief
 
Join Date: Apr 2021
Location: Wake Forest area, NC
Posts: 267
Default

you will also get post counts, while in the Lobby you get no post counts. This section is for general type of questions or BS'ing and doesn't count toward post count.

[/QUOTE]

Good to know.

__________________
72 Lemans sport 462 auto
75 Trans Am 4 speed 39k miles
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:46 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017