[sweeneybp]

I have a 79 T/A that came with a 301 and obviously a turbo 350 tranny. I recently installed a healthy pontiac 400 and also opted to convert over to a short tail turbo 400 tranny. When I installed the engine & tranny, I found out that the 350 crossmember didn't work. My question is what other GM crossmembers would be bolt in's. I tried to relocate the tab on the 350 crossmember to the other side of the member, but the cross member still hit's the tranny. I also realize I could drill new holes in the frame, but I would prefer to find a direct bolt in- If there is one. Thanks for the help