| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#4
07-24-2003, 06:40 PM
|
|||
|
|||
boboh1, If you are sure that the leak is from the vacume modulator at the shaft area, remove it and check to be sure that there is not a second O-ring inside housing.As mentioned in the earlier post, check the spring clip direction. If modulator checks good and there are no extra O-Rings, clean the shaft of the modulator and the housing. Apply a small amount of form a gasket around the seal area. Install it and let it dry for about 1 hour.
|
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode