| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
12-20-2005, 09:44 PM
|
|||
|
|||
jetting too lean?
My carb is a holley 830 cfm dp and came with 78 jets all around (and front and rear 6.5 power valves). I swapped the primary power valve for a 4.5 (my motor makes about 8.5" at idle), plugged the secondary power valve and changed the secondary jets to 84's. It seems from searching various threads that my current jet setup is somewhat on the lean side.
My motor specs: 461 ci, 9.6:1 comp. ratio ported e-heads 288HR cam torker II intake Holley (9381) 830 cfm (primary: 78 jets, 4.5 power valve, secondary: 84 jets, plugged power valve), 30 cc accel pumps (primary and secondary). Is my current jetting too lean? Any other suggestions on my carb setup? |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode