[Andre]

Here is the chassis with the Pypes 2.5" x over system installed. I opted to have the joints welded instead of clamped. The fit is excellent. The shop will come back and clean up the weld areas and paint with some high temp paint.

The driveshaft was powdercoated in clear, low gloss, but that seems to give the metal a different appearance than the original. In a points judged poci show, I'd be losing points all over the place.

The red/white stripe are correct for the 4 speed driveshaft I believe.. Probably the same as the 2 speed since it is the same unit