| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#15
11-08-2006, 11:05 PM
|
|||
|
|||
jet remanufactured quadrajets
does anyone have any experience with these carbs. they sell at summitt for $389 with no wait. they have three different types ranging from stock to tricked out.
i have a quadrajet that's an 800 cfm but i need to replace the gaskets as they leak a little gas. other than that the carb ran fine. that was on a stock 250 horse '73 model 400 with 4X heads. i rebuilt the motor and should be running close to 500 horses. will my old carb be sufficient and if so how do i go about taking the choke mechanism that goes into the intake off. i have an ebrock perf. rpm now and i don't see any accomodations for this choke set up, besides i live in the deep south with warm climates. i don't want the choke on there anyhow.
__________________
 "Second place is the first loser""That's no oil leak....that's just sweat from all that horsepower." |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode