[njsteve]

Originally Posted by SD73

Yeah. That valence is a must! I bought a repro from the Parts Place. The paint shop didn't have anything nasty to say, so I'm hoping it's pretty nice.

They obviously didnt try to bolt it up yet. The mounting bosses are totally wrong: they are about 1/2 inch too wide on either side to mount into the recesses in the lower part of the endura nose. So without modifications it will have a horrendous gap between the nose and the valance and will also break apart if they try to pull it into position with bolts. I bought the same valance and sold it on ebay after seeing how much work would be required to fix it a brand new part. I repaired my original valance. I was not that hard to weld it up:

http://forums.maxperformanceinc.com/...433662&page=12