| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
11-08-2007, 01:08 PM
|
|||
|
|||
new times,now I need a rollbar
I bested my last time of 11.75 with a 11.45.Only change I made was installing a line lock.This enabled a better burn out.60ft went from 1.815 to 1.675,mph remained about the same 116.8 to 117.2. Also ran a Rochester 800 this run and a over rich 830 QFT
back in July's 90 degree heat.Not a good comparison between carbs due to the 20 degree difference in temps.Though I did bring my recalibrated 830QFT dp with me to compare against the Rochester.Only was able to make that one run and was ask to either slow it down or get the required safety equipment.Had fun.So now what is a good roll bar for a sec gen firebird?
__________________
76 T/A 455, cnc chamber E heads,OF hyd roller ,yella terra shaft rockers 11.47 119 |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode