[andrewb70]

Being around car projects for a long time I can tell you that every build has a few dirty little secrets. Some have more than a few. My project is no different. When I got the car aligned the most caster that we could get was zero degrees. This might be due to frame sag, or who knows what, but thats how it was. This doesn't hurt the handling, per say, but it makes for a less than idea driving car. Without any caster the steering wheel doesn't snap back to center after making a turn. So you actually have to steer it out of a corner. Not the most ideal situation. So I called Mark at SC&C and he convinced me that his adjustable upper control arms are the way to go. I was going to get them at some point later because I want to swap to the AFX spindles, but not seemed like the perfect time.



The SPC control arms will allow me to dial in more caster while not increasing negative camber, and they will work with the AFX spindles.





When taking everything apart I noticed that my QA1 shocks were leaking and pretty much not working. This is most likely due to the fact that the car sat for a long time. So a new set is on the way and will be here tomorrow. I will send the old ones to get rebuilt and it will be good to have a spare set, just in case.

I am in a bit of a rush because I want to take the car on a road trip to Chicago on Saturday...

Andrew