 |
|
| Non Pontiac Motors in Pontiacs includes factory 403,305,350 Chevy, Buick V6, Also Pontiac Motors in non-Pontiacs! |
|
|
Thread Tools | Display Modes |
|
#1
05-30-2009, 12:59 AM
|
|||
|
|||
Pont 350 in 87 Caprice
I am about to start on this project and wanted to see if anyone had some advice. I want to replace the 305/700r4 in this car with a pontiac 350 and a 350 turbo trans I have laying around. My biggest concern is with the motor mounts. The motor I have is a 75 Firebird 350. I was hoping that the frame mounts were the same for the 305 and 301 powered b-bodys, but this doesn't seem to be the case. Should I get frame mounts for a 301 powered b-body and use those? And are there multiple mounting holes in the frame like the G-bodies? The transmission crossmember is also another area that I will need to look at. I hope the 700r4 to 350TH swap is an easy one. My goal is to start tearing the car apart next week so I thought I would post here. I am just looking to build a cheap beater with parts that I have. Here are the parts I have to throw at it. Thank you in advance
1975 350 1967 326 heads Comp 270 single pattern cam performer intake HEI 600 CFM Carter carb 350 TH 3.08 posi rearend |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode