I would love to get you some measurements BUT my car is at the paint shop for final prep work. I expect to have it home for the weekend. If you can wait till then I will measure it up and get you the numbers. I went with the 3 inch exhaust but center to center should still be close.
I remember cutting the pipes both infront of the X and behind. Behind the X was just a trim (half inch off) but in front was more like 2 to 4 or even 6 inches off (it was 7 months ago so my memory is a little fuzzy). I put on dougs headers (obviously from the pics) so I had to get the header extensions from pypes too.
I will get back to you when I get my car home.
|
08-18-2009, 01:35 PM
Threaded Mode