[yzinger]

is the following (only the 6x4 rebuilt ones worth $750?)

Brad, I have the following:

Heads: #62, #46, #4x, #6X-4. The 6X-4 are complete ready to bolt on. I had them on my show car, but decided to go with KRE aluminum heads. Heads have stainless steel Manley valves, Comp Cams springs, retainers, locks, and seals. Heads have been milled to 90cc combustion chambers with a mild port and polish. Brass freeze plugs installed seats and guides done three summers ago. Heads were assembled and tested by PA Performance in Shediac NB. The 6x-4 heads are $800.00. The remaining heads are $200.00 per set and will need to be taken apart and refurbished.

...also, if i chose to reuse the 6x8 is there a good setup for them, what CR would i have on the 400?


Thanks
Brad