| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#24
07-09-2011, 08:17 AM
|
||||
|
||||
+1 on the valve springs. The Crower 68404 springs are the best "drop-in" spring out there for the Pontiac heads with stock components. They don't put killer pressures on the cam/lifters, and have a LOT of room for running larger than stock cams without getting anywhere near coil bind.
We built a set of #46 heads yesterday in the shop and used them. They fit all the stock parts, and with a little seat grinding and valve work very little shimming is required as they are designed to run at 1.600" installed height.......Cliff
__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran! https://cliffshighperformance.com/ 73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile), |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode